[Mercedes Benz E300 (W213)] Easy Access & One Touch Memory Seat

▲ Mercedes Benz E300 (W213) - Easy Access & One Touch Memory Seat

Mercedes-Benz E-Class (E300 / W213) In The INDIWORK Garage.

*

Easy Access & One Touch Memory Seat

Use Device : EW200 Module

*

1. Easy Access

Easy Access is a system for the convenience of boarding and getting off.

When the vehicle is started, the seat automatically moves to the driving position,

When getting off the vehicle, the seat automatically moves backward so that the driver can get off easily.

2. One-Touch Memory Seat

The seat position provides three memory.

However, in order to move to the position memorized in position 1, it is necessary to hold the button until the move is completed.

So we programmed to move the sheet to that position by pressing the button once.

Easy Access and One Touch Memory Seat system...These are options that are not in the original E300 (W213) Mercedes-Benz. You can use these functions by adding a CAN module. (EW200 module)

Remove the footplate of the passenger seat to install the EW200 module.

You can see a lot of CAN wiring. I have to connect the wires correctly.

Connect monitor CAN, PAS CAN, and Ground only. 

Close the CAN block and assemble the quick panel to complete the installation.

After installation is completed, there is no difference from the initial appearance.

I saved the driving position at number 1. And when the KEY is OFF, the seat is automatically moved backward.

Perfect installation was completed today also.