[Mercedes Benz E300 (W213)] Easy Access & One Touch Memory Seat

-


▲ Mercedes Benz E300 (W213) - Easy Access & One Touch Memory Seat





Mercedes-Benz E-Class (E300 / W213) In The INDIWORK Garage.

*
Easy Access & One Touch Memory Seat

Use Device : EW200 Module
*

1. Easy Access
Easy Access is a system for the convenience of boarding and getting off.
When the vehicle is started, the seat automatically moves to the driving position,
When getting off the vehicle, the seat automatically moves backward so that the driver can get off easily.

2. One-Touch Memory Seat
The seat position provides three memory.
However, in order to move to the position memorized in position 1, it is necessary to hold the button until the move is completed.
So we programmed to move the sheet to that position by pressing the button once.



When I lift up the footrest of passenger seat to install the Easy Access CAN module on the Mercedes W213, the can block will be visible.


When I lift up the top of the CAN block, there are many wires.

I find the CAN control wiring among many wires and connect them with the CAN wiring of the CAN module.


You need to find and connect the CAN control wiring correctly.
And, the CAN wiring of the monitor and the P.A.S must be correctly identified and connected to the wiring of the CAN module.
Connect the Monitor CAN, P.A.S CAN, 12V power, and Ground in order.
The installation time is about 15 ~ 20 minutes and is very short.


After completing the Easy Access CAN Module installation, and restore the CAN block to its original state.


Use genuine buttons for operation. No separate switch is installed.


ON/OFF function is built in.

If you do not want to use this functions, press the HOME button on the handle for 5 seconds.
'PIBIBIG ~!' With the beep sound, both the Easy Access function and the Memory Seat function are disabled.
-------------
If you want to use this functions again, press the HOME button for 5 seconds.
'PIBIC !' With the beep sound, the Easy Access function and Memory Sheet function are activated.



댓글

댓글 쓰기

Popular Posts

AUX generator (AUX-NTG5.5) For Mercedes-Benz New E-Class (W213)

-
이미지
* AUX Generation Module For Mercedes-Benz NTG5 or NTG5.5 ㆍProduct Name : AUX-NTG5 or NTG5.5 ㆍType : Quad Lock Type, Plug & Play (Applicable only to audio self-output head unit.) (This does not apply when controlling the external amplifier from the head unit via optical communication.) Applies to Mercedes-Benz NTG5 or NTG5.5 vehicles without AUX and OEM Amplifier. And, Create AUX audio function. (Only applicable the audio self-output specification.) The FMT module or Bluetooth method have delay of audio. But AUX method realizes optimal image and voice sync without delay phenomenon. There is no wiring damage in the vehicle when installing. And, It is quad lock type and is plug and paly. When AUX function is created, it can be linked with various devices. The latest Mercedes new cars have no AUX IN PUT. NTG5.0 and NTG5.1, NTG5.5 also has no AUX. So when install an external device to the new E-Class, usually, people are use Bluetooth or FMT to output the sound to the vehicle's spea
자세한 내용 보기

[Review/BMW X5] High-definition wireless mirroring (IW06B-N23 Digital Interface & APCAST)

-
이미지
2016 BMW X5 In The INDIWORK Garage. * iPhone / Digital Smartphone Wireless Mirroring* ▲ BMW X5 HD Mirroring (iPhone/YouTube) ▲ BMW X5 HD Mirroring (AIR PLAY) The smartphone mirroring system is perfect as an auxiliary entertainment feature. ------------------------------------- Use Device : IW06B-N23 HDMI Interface & APCAST WiFi Module Remove the deck for interface installation. I removed only the necessary parts. Don't have to over-removed  for the installation. Remove the head unit NBT of X5. And it is work for HDMI interface, power, and CAN interlock. Using sound absorbing material tape, it minimizes the possibility of noise that may occur even in case. The LVDS cable of the HDMI interface connects IN / OUT at the back of the monitor. It is an HDMI cable that connects the HDMI interface and APCAST (wireless WiFi receiver). Install the ferrite core to prevent radio noise. The effect is GOOD !! The wiring between the NBT and the monitor has been completed. Then connect the HDMI
자세한 내용 보기

[Rear Interface] IW-M-PAS For Mercedes-Benz NTG 4.5 (Guide Line & PDC)

-
이미지
[Rear Interface] Model Name : IW-M-PAS Create a 'Active guide line' on a Mercedes-Benz (NTG 4.5) without rear parking lines. (* IW-M-PAS Rear Interface For Mercedes Parking Guide System & Parking Distance Control.) Supports the 2014 Mercedes-Benz(COMAND NTG 4.5 / AUDIO 2.0 ) that does not support parking guide system. CVBS(Rear) To CVBS. Implement the PGS(Parking Guide-Line System) and PDC(Parking Distance Control) with a rear camera. When connecting PAS-CAN, It outputs rear power automatically. The user setting mode makes an optimized environment for user. And, the setting mode enters by original button. Small size and easy install. ▲  Parking Test After Mercedes E-Class Rear Camera Replacement (PAS, PDC creation) ▲ Genuine rear screen without guidelines IW-M-PAS (CVBS IN / OUT PAS Interlocking Interface) Create PGS(Parking Guide Line Systme) & PDC(Parking Distance Control).
자세한 내용 보기